SymmeTry Series™

Product Specification

Panel Width 12"(305 mm), 16"(406 mm), 18"(457 mm)
Height 1 ½” (38 mm), 2" (51 mm), 2 ½” (64 mm), 3” (76 mm)
Lengths 5' (1.52 m) to 45' (13.72 m) Standard Shorter and longer lengths available-contact Morin
Galvalume/Zincalume Painted Steel Options 20 GA (0.91 mm), 22 GA (0.76 mm) or 24 GA (0.60 mm)
 Aluminum Options .040 GA (1mm) / .032 GA (.812mm)
Manufacturing Sites Bristol CT, Fontana CA, DeLand FL
And On-Site Roll Forming
Note: Onsite Roll Forming performed by Morin Certified Employee
  • Unlimited thermal expansion/contraction
  • Watertight Seam from eave to ridge
  • Significant wind uplift capability
  • Onsite roll-forming in lengths up to 300 feet
  • Down to 1/2:12 minimum roof slope
  • 4 panel depths and 3 panel widths make for a versatile system, with vertical legs ranging from 1 1/2” to 3” high
  • SymmeTry Series™ panels are by design bi-directional left to right, right to left, or start from any point on the roof 

Technical Note: All details shown on this site are only relevant for when designing in aluminum, Galvalume/Zincalume and Galvalume Plus materials. For copper, zinc or stainless steel projects please consult with your Morin Regional Sales Manager or Independent Agent